Move disabled vehicles easily. These skates are bright orange for added visibility and include cable loop for easy carrying and storage. Each skate measures 15-3/4"L x 3-1/2"W x 3-1/2"H.
Made of recycled plastic.
Sold individually.
HIGH WORKING LOAD LIMIT. A single tire skate has a 4000 lb working load limit. With a tire skate under every tire, tire skates can be used to move and maneuver a crashed bus.
Skate Past Towing Nightmares!
A vehicle parked, missing wheels, or has its axle locked? No problem!
Mytee Products' Tire Skates are excellent for positioning vehicles for towing or loading onto rollback beds. When done improperly, towing can damage the vehicle, flatbed, and the surface the vehicle is on. Skates help prevent damage by minimizing friction between the wheels and the ground when pulling the vehicle onto a bed.
Skates are also used to tow cars and trucks that have lost a wheel. Placing one or more skates under the vehicle’s suspension raises it to a height that allows for safe loading. Skates can also move vehicles with wheels that are stuck in a turned or parked position, or with emergency brakes that won’t release.
Our Tire Skates solve towing nightmares when it comes to vehicles locked or too badly damaged to control yourself!
MAXIMUM SAFETY
ECO-FRIENDLY
AS MANY AS YOU NEED
LIGHTWEIGHT + EASY TO CARRY
Our bright orange color makes these skates visible even in low light!
With a tire skate under every tire, our tire skates could be used to move and maneuver a crashed bus!
These tire skates are made of heavy-duty post-recycled plastic!
Plastic scrap that would have been thrown away was repurposed into these skates!
These tire skates are sold individually, so you can replace a single skate if only one skate from a set gets damaged!
An auto-hauler should have one skate per tire on the vehicle for easy towing!
Each skate only weighs 3.3 lbs!
All of our tire skates are conveniently just over 15” long, which makes them easy to pack and take to the next job.
Each tire skate fits easily into a toolbox!
Properly Apply Tire Skates:
Step One:
Step Two:
Step Three:
Grab the proper amount of our Polyurethane Tire Skates for your towing needs - we recommend one skate per vehicle tire!
The smooth surface allows for less friction during towing, which lessens the risk of damaging the tires or vehicle!
Insert the tire skates under the front of the tire and push them just slightly up under them. Line up the top of the skate with the bottom of the bumper trim.
You want to avoid pushing them completely under the tire, or else the skate will hit the deck of the ramp or bed and need to be reset or adjusted.
Begin towing!
Our Tire Skates help ease the car onto your flatbed without the car being bumped and possibly damaging its front end.
The vehicle should smoothly glide onto the ramp/flatbed.