E-Tracks have been proven to be one of the most versatile pieces of equipment to have on a trailer. Here at Mytee Products, we carry many accessories specifically for E-Tracks that can allow truckers to make use of unoccupied slots on your track and space in your trailer. No matter what you need to be secured, or what you have that's loosely laying around, we have an E-Track attachment that can help utilize your E-Track to its fullest potential.
Our E-Track accessories are to help you fully utilize your E-Track systems on cargo van or enclosed trailer cargo securement. Each attachment is made to fulfill a specific purpose. Many of them assist in the securement of cargo such as E-Track Sleeves, O-Ring mounts, and Hooks. These types of hardware fittings are useful during moments when you might not have an E-Track strap available to use, or you need a better grip on it. Other pieces of hardware allow you to store and mount specific or loose items like tires, wood, or certain small items.
No matter what you need to do, whether adding a bit more security to your cargo or making sure some of your loose items are kept in place, there is an accessory that is the right fit for the job. We carry a good variety of hardware that have you covered.
An E-Track sleeve is used on cargo load bars to create a tie-down point wherever you may need it. The sleeve slides onto the cargo bar and has two E-Track slots on both sides, as well as one slot on the top and the bottom.
In some cases, you may not be able to reach another E-Track slot to tie your cargo down. Our Tie-Down Plate allows you to make a simple anchor point in your trailer, truck bed, garage, or anywhere you need.
In cases, you don’t have a strap designed to go into an E-Track, or you need to utilize more straps, our O-Ring E-Track fitting can help you out. This accessory has a working load limit of 1,335 lbs and lets you use straps that have S-Hooks.
This E-Track attachment lets you mount 2x4 or 2x6 pieces of lumber to create almost whatever you’d like. You could create shelving letting you store more, a rack for tires, or just simply a divider between your cargo.
One of the main purposes of our enclosed trailer accessories is to utilize all the space in your trailer and keep it organized. This accessory is a versatile J-Hook, made out of steel and zinc plated, designed to store ropes, straps, tools, and much more.
Similar to the J-Hook, this accessory lets you optimize your trailer space and keep items organized. The hanger hook is perfect for holding tools like rakes and shovels and can hold up to 400 lbs. It's made out of steel and coated black to prevent corrosion.
As the name suggests, this fitting lets you mount spare tires of any size onto it to keep them in place and organized. It’s an extended bolt with a nut at the end that is adjustable to prevent the tire from sliding off.
When transporting a bike, it’s important to have a Wheel Chock. This type of attachment is best used for horizontal E-Tracks attached to the bed of a trailer or pickup truck. It’s made of steel and powder-coated black to prevent rust or corrosion and features a rubber pad on the bottom to prevent damage to your trailer.
The Rope Tie Off accessory is similar to that the O-Ring accessory. This one, however, features a 6” strap with a O-Ring at the end and has a much higher working load limit, coming in at 2,000 lbs.
This beam mounts onto vertical E-Tracks on both sides of your trailer wall to allow you to shore up your cargo. These beams can hold up to 2,200 lbs and extend up to 103” depending on the type.
Mytee Products is all about making sure you’re utilizing the space in your trailer allowing you to haul more. Not only do we carry a wide variety of enclosed trailer supplies, but we also carry E-Tracks whether it’s horizontal or vertical. Feel free to browse our stock for more, or contact us at 1-888-705-8277 or [email protected].