Few things are as valuable to the flatbed trucker as the tools in his or her toolbox. It is that collection of tools that keeps the trucker on the road even when minor problems occur. But the safety and security of one’s tools is only as good as the toolboxes used to store them. So when you are installing new toolboxes, you want to make sure they are mounted correctly.
There are different kinds of toolboxes that truckers use. Some are mounted on flatbed trailers, others on the back of a cab, and still others on the sides of a tractor. Trailer tool boxes might be the hardest to install as they are usually mounted on the underside of the bed. Their weight and size make under bed boxes a bit more difficult to manage.
A box that is properly installed provides years of valuable service for the trucker. If you are planning to install new boxes on your trailer, here are some tips you might find helpful:
Tip #1 – Choosing Box Size
Installing new boxes to replace old models is easier if you stick with the same size. Toolboxes come in a number of standard sizes, so it shouldn’t be hard to find what you are looking for. By sticking with the same size, you should be able to use the same mounting brackets and hardware.
Installing new boxes where there previously were none leaves you with a few more options. Consider what you will be carrying and how much storage space you will need. Also, determine before you purchase where you want your toolboxes mounted. Then take careful measurements so you end up with the right size.
Tip #2 – Choosing Mounting Brackets
Very few trailer toolboxes come with mounting brackets included. You will have to buy them separately. There are universal brackets that fit just about every toolbox on the market, as well as specialized brackets for custom boxes. That said, do not just assume brackets will work with your box. Check with manufacturers or sellers to ensure you get the right combination.
Tip #3 – Test Before Mounting
The location of hinges and access panels will determine exactly where on your trailer your toolbox will be mounted. Keep in mind you will need some clearance. It’s always best to test the location for a new toolbox before you mount it. Use a hydraulic jack to lift your toolbox into place, then test it by opening and closing the access panel and checking the box’s position against the bed and any other trailer structures.
Tip #4 – Heavy Duty Hardware
Your trailer tool boxes end up carrying a lot of weight over their lifetimes. Furthermore, they will be subject to constant road vibrations as well as the shock of every bump and pothole you hit. Therefore, do not skimp on mounting hardware. This is one instance in which investing in top-of-the-line parts is always a good idea. Purchase heavy-duty mounting hardware you know will stand up to years of abuse and punishment.
Tip #5 – Ease of Access
Lastly, choosing mounting locations for your trailer toolboxes is as much about convenience as it is utility. Only you know what would be the most convenient locations based on how you do things. Try to locate your boxes where they make the most sense, according to the kinds of work you normally take. You want to spend as little time as possible getting to the tools you need at the times you need them most.