2” x 30’ Kinedyne Ratchet Strap w/ Flat Hook Wide Handle - Red

2" Kinedyne Ratchet Strap with Flat Hook 

• Working Load Limit: 3,335 lbs
• Breaking Strength: 10,000 Lbs
• Durable Polyester Webbing: Ratchet Straps are made of durable polyester webbing. Polyester webbing barely stretches under heavy loads and water slides right off it.
• High Visibility: The Ratchet Straps come in a shade of yellow that provides high visibility.
• Versatile Flat Hook End Fittings: Flat hooks are compatible with most flatbed trailers. They can anchor directly to the side rail on the trailer. Flat hooks are made from heavy-duty steel and sustain a high working load limit.
• Wide Ratcheting Handle: With its wide handle, the ratcheting mechanism allows for a better grip than narrower handles, making it easier to achieve the desired level of tension with less force.
• This Ratchet Strap consists of a long strap with a ratchet mechanism on one end and a flat hook on the other end. 
• These heavy-duty ratchet straps are designed to handle most types of flatbed tie-down requirements. All ratchet straps are tagged with their working load limit to meet DOT regulations and WSTDA-recommended standards.

How is Ratchet Strap used?

• The ratchet mechanism typically consists of a handle, a spool, and a release lever. The handle is used to wind and unwind the spool, which tightens or loosens the strap. The release lever allows for quick and controlled release of the tension.
• One end is attached to a secure anchor point on a vehicle or other structure and the loose end of the strap is then threaded through the ratchet mechanism, ensuring that it is not twisted or tangled.
• Once the strap is in place, the user cranks the ratchet handle to tighten the strap around the load.
• As the handle is cranked, the spool winds up the strap, pulling it tight and applying tension to the load.
• Once the desired tension is achieved, the ratchet handle is closed to lock the strap in place, preventing it from loosening during transport.