1.25" - 2" Anti RattleTrailer Hitch Tightener Stabilizer Clamp

SKU

Hitch-T

1.25" - 2" Anti Rattle Hitch Tightener
U-Bolt
Zinc Plating, Powder Painted Black
Comes With: (2) Lock washers, (2) Flate Washers, (2) Nuts, (1) Ubolt, (1) Plate

Availability: In stock

$5.59

$5.39

for 10 and save 4%
$5.09

for 50 and save 9%

Skip to the end of the images gallery

Skip to the beginning of the images gallery

1.25" - 2" Anti RattleTrailer Hitch Tightener Stabilizer Clamp

Shop for Other Sizes and Similar Products Here (Go)

5.59 USD

Product Description

Have A Question 0 Question | 0 Answer

Specifications

Specifications
Weight (Lbs)	1.50

1.25" - 2" Anti Rattle Hitch Tightener
U-Bolt
Zinc Plating, Powder Painted Black
Comes With: (2) Lock washers, (2) Flate Washers, (2) Nuts, (1) Ubolt, (1) Plate
Installs on Class I, II, III, IV hitches that measure either 1.25" or 2". Will not work on anything that measurers anything larger than this.
Designed to eliminate hitch noise and rattle when installed properly on your trailer ball hitch, cargo carrier, mount, bike rack, etc. Also will stop wobbles as you're driving down the road.

Eliminate Rattle and Stress!

Mytee Products' Hitch Clamp eliminates the rattling or wobbling noises hitches can make between a bike rack or trailer hitch and your hitch receiver. The Hitch Tightener removes any space between your hitch mount and your hitch receiver and is designed to be used with cargo carriers, hitch bike racks, and just about any other receiver-mounted accessory.

The Heavy Duty 1.25''-2'' inch clamp is built tough and ready for your heavy loads. Built from high-strength steel, this tow hitch stabilizer is ready for years of service and your next adventure!

One Step For A Silent Trip!

Hitch Stabilizer Specifications

1.25" - 2" Anti Rattle Hitch Tightener
Material: Steel, Rust Free, Power-Coated
Comes with: (2) Lock washers, (2) Flat Washers, (2) Nuts, (1) U-bolt, (1) Plate

Perfect Fit!	Order Includes:
Our hitch tightener is the ideal fit for hitches on trucks, SUV's, and trailers. Installs on Class I, II, III, IV hitches that measure either 1.25" or 2". This hitch clamp Will NOT work on anything that measures larger than this, as the U-Bolt won't fit around the hitch.	When you order our 2-inch hitch stabilizer you will receive: Our heavy-duty, stainless steel U-bolt Thick, powder-coated zinc plate Two lock washers and flat washers help to tighten it in place around your hitch! Two stainless steel, anti-rust nuts will ensure the plate is snug against your hitch and that the U-bolt won't come loose!

Easy Installation!

Make sure you install the plate the right way!
Rest the U-Bolt over the hitch. Place the powder-coated plate on the bottom of the hitch, lining up with the U-Bolt.
When they're properly lined up, put on the original lock washers, flat washers, and fasten with the rust-resistant nuts.
If your trailer hitch spacer is firmly in place and you don't hear any rattling or wobbling while driving, then it is fixed on securely!
For extra security, consider investing in our locking pin for trailer hitches. It provides extra support AND helps deter theft or towing attempts!
Our hitch clamp with 2 inch anti-rattle design and the tailgate anti-theft lock pin will help give you the peace of mind you deserve while on the road!
Don't worry about theft and enjoy a quiet drive!