Snatch Block with Hook
SKU
SB-C
- Sheave Size: Varies From 3" to 6"
- Wire Rope: 3/8" through 1/2"
- Working Load Limit: Up to 8 Tons
Availability: In stock
Only %1 left
As low as
$22.99
Regular Price
$29.99
22.99
USD

Specifications
Weight (Lbs) | 5.05 |
---|
- Sheave Size: Varies From 3" to 6"
- Wire Rope: 3/8" through 1/2"
- Working Load Limit: Up to 8 Tons
- The snatch block with hook is a pulley system with covered and protected yet removable sides.
- It is possible to unscrew or remove one side, slip in the winch cable or rope and then re-protect the same side to prevent the cable from leaving the groove.
- It has either a hook or a shackle at it’s tip.
- Wire rope snatch blocks or pulleys are used to change the direction of the pull to a different angle relative to a fixed point.
- They are also used to create more complex pulley structures and gain mechanical advantage.
- A pull of 10 lbs can be changed to a pull of 80 or even 800 lbs depending upon the mechanical advantage offered by the pulley structure.
Product Faqs
-
Do you have the 8 ton that will work with a half inch cable?Question by: on 2020-12-21 11:51:49
Snatch Block with Hook WLL 8 Ton 6" Sheave :
Should work with a 1/2" cable.
Answer by: Ray Wilson on 2020-12-21 11:51:49 -
Is this made in the USA?SKU: SB45-44-1/2" Sheave Size1/2" Wire RopeWorking Load Limit: 4 TonsQuestion by: on 2017-12-13 17:27:01
no they are made over seas
Answer by: Steve Shupert on 2017-12-13 17:27:01