Heavy Duty Engine Water Pump Fits International 3200, 4100, Capacity Texas TJ5000, TJ6500 Replaces OEM 7081-213-C

Want to optimize your engine's cooling system? Get this Engine Water Pump, Coolant Pump Kit - Fits Navistar Maxxforce 7/6.4L Engine, International 3200, 4100, 4300, 7081-213-C. Our water pump is made using durable aluminum construction and efficient performance and is a reliable solution to minimize engine overheating and maintain peak performance. Find the other essential details of this water pump below:

• Material & Construction: This water pump is manufactured from aluminum material. This material makes the water pump lightweight, durable, corrosion- tolerant, and provides efficient heat dissipation properties.
• Impeller Design & Flow Rate: This heavy-duty water pump is available with a 7-vane impeller for optimal coolant circulation. It has a flow rate of 175 U.S. gallons per minute, which helps to ensure high cooling efficiency even under demanding conditions.
• Application: The pump circulates coolant through the engine block and cylinder heads, transferring heat to the radiator for cooling, ensuring a consistent operating temperature. Our water pump ensures efficient cooling system performance, minimizes overheating, and protects your engine from potential damage caused by excessive heat. 
• Compatibility: Check the complete compatibility list below:

Compatible with Other Brands & Their Part Numbers:

• Fits Gates: 42244HD
• Fits Navistar: 1832-498-C, 7081-213-C, 7081213C91, 7081213C92
• Fits OE Aftermarket: 3820153
• Fits Tramec Sloan: 6319
• Fits US Motor Works: US98

Compatible with Make Model Year:

• Fits Capacity Of Texas TJ5000: 2011-2014, 2017
• Fits Capacity Of Texas TJ6500: 2011-2013
• Fits Four Winds International Serrano: 2010-2011
• Fits Holiday Rambler Trip: 2011-2012
• Fits IC Corporation AC Commercial Bus: 2012-2016
• Fits IC Corporation AE School Bus: 2015
• Fits IC Corporation AR School Bus: 2013-2015
• Fits IC Corporation BE School Bus: 2008-2015
• Fits IC Corporation CE Commercial: 2008, 2010-2015
• Fits IC Corporation CE Integrated: 2008-2009
• Fits IC Corporation CE School Bus: 2010-2016
• Fits IC Corporation HC Integrated Commercial: 2008-2015
• Fits International 3200: 2008-2011
• Fits International 4100: 2008-2011
• Fits International 4300: 2008-2016
• Fits International 4300LP: 2008-2015
• Fits International Durastar: 2015-2016
• Fits International TerraStar: 2010-2018
• Fits Itasca Sunova: 2010
• Fits Itasca Sunstar: 2010
• Fits Monaco Coach Vesta: 2011-2012
• Fits Nexus Ghost: 2014-2015
• Fits Nexus Phantom: 2014-2018
• Fits Thor Motor Coach Serrano: 2011-2012
• Fits Tiffin Allegro Breeze: 2011-2015, 2017
• Fits Winnebago Sightseer: 2010
• Fits Winnebago Vista: 2010
• Fits Workhorse Custom Chassis W22: 2009-2010
• Fits Workhorse Custom Chassis W62: 2010

Installation Instructions: To install the water pump, first drain the coolant and remove the old pump by disconnecting the hoses and unbolting it. Clean the mounting surface, then place the new pump with a gasket and bolt it securely. Reattach hoses and belts, refill the coolant and test the system for leaks or abnormal noises.

When to Replace Your Vehicle’s Water Pump Kit?

• If you notice coolant pooling under the vehicle or dripping near the engine.
• Rising engine temperatures or frequent overheating could indicate a failing water pump.
• A damaged impeller or bearing in the pump can produce unusual noises.
• Visible steam from the radiator or engine bay is a sign the cooling system isn’t functioning properly.
• Inspect the water pump for corrosion or wear, which can reduce its efficiency.

Reasons to Choose Our Engine Water Pump Replacement Part

• This is a direct replacement for the OEM part number 7081-213-C, ensuring an exact fit for a wide range of vehicles.
• It circulates 175 US Gallons per minute, which is ideal for different trucks requiring efficient cooling.
• It is built for longevity and tolerance to high pressure and heat.
• It can fit the Navistar, OE Aftermarket, Gates, Tramec Sloan, and US Motor Works.

Safety Considerations

• Always let the engine cool completely before draining or refilling the coolant to avoid burns.
• Ensure you have the correct tools to avoid damaging the pump or engine components during installation.
• Check hoses, belts, and the radiator for wear or leaks when replacing the pump.
• Always refill with the manufacturer-recommended coolant type and mixture.
• After installation, run the engine and inspect for leaks or unusual noises before completing the job.

18-month Warranty: This product is covered for one year, 100,000 miles after the installation, or 18 months after the purchase, whichever comes first. The product’s warranty is only active when the parts have defective material or workmanship defaults. Inappropriate application will lead to the dismissal of the warranty. Additionally, the warranty doesn’t cover the parts that fail or get damaged due to misuse, misapplication, or accident. If the customer wishes to return/replace this product under warranty, reach out to us. The team will verify by doing a thorough inspection and if they find a defect that is covered in the above-mentioned warranty; the product will be replaced without any charge. We disclaim liability for labor or consequential damages of any nature. We request the customers to wait until the claim is resolved and settled from our end after the replacement is requested under warranty.