More from: grille guards

A Grille Guard by Any Other Name Is Still a Grille Guard

The grille guards we sell to truck drivers are based on an idea that has been around for decades. In other words, grille guards are not new technology. But today they constitute one of the hottest trends among American truckers. Larger numbers of truckers are sporting grille guards to protect the front ends of their trucks and make them look better at the same time.

Did you know that the term ‘grille guard’ is not the only term used to describe these devices? There are other terms as well, used interchangeably around the country. We will look at some of those names in this post. If you are looking for a grille guard for your truck, we invite you to check out our inventory. We may have just what you’re looking for.

Grille Guards

The name ‘grille guard’ has really become a generic term that covers all the different kinds of guards you could mount on the front of a truck. This is what causes some confusion among consumers. Technically speaking, a grille guard is any kind of guard that covers the grill area of a four wheeled vehicle. However, the existence of some of the other names for this product has led to ‘grille guard’ being a bit more specific.

A grille guard, as opposed to a bull or cow guard, tends to go across the entire front area of the truck. It protects the grill, bumper, and front lights.

Bull and Cow Guards

Two other names for the grille guard are bull and cow guard. No one knows for sure where these names came from, but many speculate they come from ranching. The idea here is that you put a guard on the front of your truck to protect it against minor collisions with bulls and cows in the field. Given that pickup trucks have replaced horses on many modern ranches, this makes a lot of sense.

The one thing to note about bull and cow guards is that they may not cover the entire front area of the truck. Smaller guards cover only the grill area. Some even come with skid plates that protect the underside of the truck from things like rocks and tree stumps.

Brush Guards

The term ‘brush guard’ is another with unknown origins. It is believed that the term originated as a way to describe a piece of equipment that would protect the front of the vehicle as it moves through tall grass and brush. A brush guard may or may not cover the entire front of the vehicle on which it is mounted.

The Name Doesn’t Really Matter

At the end of the day, the name of the guard you choose doesn’t really matter. What matters is that your grille guard fits your truck properly and provides the kind of protection you want. To that end, note that grille guards do not require cutting or drilling to install.

Grille guards are designed for specific makes and models of vehicles. As such, a guard manufactured for one type of truck may not easily mount on another without modification. That’s why we recommend only buying a grille guard manufactured for your make and model.

If you have any questions about our grille guards, please do not hesitate to contact us. We would be more than happy to help you find a guard for your truck. And while we’re here, we would like to offer you a full selection of truck tarps, rigging supplies, towing supplies, and more. We are your one-stop shop for all your cargo control needs.


The Differences Between a Bull Bar and Grille Guard

You may run across bull bars in your search for a good grille guard for your truck. Note that bull bars and grille guards are not the same thing. Furthermore, bull bars are hard to find for big rigs because they really aren’t appropriate for large, commercial vehicles.

We want you to be familiar with the differences between bull bars and grille guards so that you don’t buy the wrong thing for your truck. If you are in the market for grille guard, we have several models for you to choose from. Please take a few minutes and check out our inventory.

The Basics of Bull Bars

We are not quite sure where the name of ‘bull bar’ came from, but it really doesn’t matter in the context of this discussion. A bull bar is generally an A-shaped guard the affixes to a vehicle via the front of the frame. It has an outer frame, a single crossbar, and a skid plate at the bottom.

Bull bars are relatively small in comparison to the vehicles they are fitted to. They are intended only to protect the immediate front and center of the vehicle during a collision with an animal. A bull bar will protect the radiator, grille, and front bumper, but little else.

The biggest difference between a bull bar and grille guard is the fact that the former does very little to protect beyond the immediate center of the front end. There is no protection for headlights or turn signals. In the event of an off-center collision, a bull bar is rendered practically useless.

Their small size and lack of full protection makes a bull bar inappropriate for commercial vehicles. They are fine for pickup trucks and SUVs where owners are looking for minimal protection against damage from animal collisions.

The Basics of Grille Guards

Where bull bars are normally found only on SUVs and pickups, grille guards are found on trucks of all sizes. Big rigs fitted with grille guards are more readily seen these days, thanks to growing popularity within the trucking industry.

A good grille guard provides full coverage across the lower half of a truck’s grille area. The smallest of guards fully protects the front bumper and the truck’s grille and radiator. Larger guards extend fully upward to protect lights as well.

Made from tough, tubular stainless steel, a grille guard is intended to provide maximum protection during collisions with either animals or other vehicles. A good grille guard can leave a truck virtually unscathed following an accident.

Protecting Your Truck

Any desire to protect the front end of your truck should be met with a grille guard rather than a bull bar. Even if you can find a cheaper bull bar for your rig, it is not worth the investment. Bull bars might be great for pickups and SUVs, but they are a waste of money for big rigs.

Buy a grille guard and get maximum protection at the same time. Note that grille guards and trucks do have compatibility issues, so you need to make sure that the guard you buy will fit your truck. Also note that you should be able to purchase a guard that doesn’t require any drilling or welding. It should attach to the front of your truck very easily with the appropriate brackets.

Mytee Products carries several different models of grille guards at this time. If you don’t see what you need, please give us a call anyway. We still might be able to help you find and acquire the right grille guard for your truck.


What to Look for in a Grille Guard

Take a good look around and you will probably notice more truck drivers installing grille guards on the fronts of their tractors. Grille guards are one of the hottest items in the trucking industry right now. Why? Because they are functional, affordable, and aesthetically attractive.

A well-built guard can mean the difference between preserving the front of your rig and having to pay thousands of dollars to repair it after a collision with an animal. A grille guard also minimizes damage in collisions with other vehicles, and it makes your rig look better at the same time.

Are you in the market for one? If so, here’s what to look for as you shop:

1. Grille Coverage

The number one reason for installing a grille guard is to protect the front of your truck. So grille coverage is really the first priority. You have to ask yourself how much of the front of your rig do you want to protect with the guard. Then consider the actual size of your tractor in relation to the amount of area you need to protect.

The largest trucks will not get much coverage with a small guard. The other side of that coin are large grille guards that would be too big for smaller trucks. You can have too much of a good thing, especially if a grille guard is wider than the front of your rig.

2. Strength and Durability

Stainless steel is the go-to material for manufacturing high quality grille guards. Do not settle for anything less. You want something that is strong and durable, something that will last for as long as you keep driving.

Look for a grill guard manufactured with heavy-duty steel; 14-gauge steel should be sufficient for most needs. Also check to make sure the guard is of tubular construction. Geometry dictates that tubes are a lot stronger for this kind of application than rectangular shapes.

3. Compatibility

You ideally want a grille guard that attaches easily without any modification on your part. Guaranteeing that is a matter of buying a guard that is compatible with your particular truck. Yes, there are compatibility issues.

Each of the grille guards we carry has its own dedicated page on our website. On each page you will find a product description that includes compatibility information. If you cannot locate your truck model and year on the compatibility list of a particular guard, please contact us before purchase. We would rather help you find the right grill guard than have you buy one only to find out it will not work.

4. Aesthetic Appeal

Finally, we wouldn’t think about explaining what to look for in a grille guard without talking about aesthetic appeal. As a professional truck driver, you take great pride in your rig. We get that. We wouldn’t want you to settle for something that makes your truck look less than appealing.

The reality is that a good grill guard can truly enhance the looks of your rig. We trust this is important to you even if you never enter your truck in competition. And if you are a show competitor, it goes without saying that not just any grill guard will do. You want one that fits correctly, provides an appropriate amount of coverage, and looks spectacular when cleaned and polished.

Grille guards are all the rage right now. If you are in the market for one, we hope you’ll consider the Mytee Products inventory. And while you’re here, feel free to take a look at all the other cargo control and general trucking products we carry.