(0 item) - $0.00

You have no items in your shopping cart.

section

Trailer Loading Ramps

Our Heavy Duty Aluminum Trailer Loading Ramps and Step Deck Ramps are available in an array of design styles to provide easy transition between trailer platforms for cargo vehicles. An all-aluminum construction by AWS-certified welding technicians together with adjustable pivot points yields light-weight components that are relatively easy to handle. Most items can be conveniently stored along the trailer's main beams, or stored in one of our toolboxes.



Grid  List 

Items 1 to 10 of 15 total

Page:
  1. 1
  2. 2
per page
  • Heavy Duty Trailer Loading Ramp Full Kit

    Contents of the Master Kit :

    • (Qty 4) 18" x 96" 23,500 Lbs Single Ramps
    • (Qty 2) Adjustable Stands 18" - 24"
    • (Qty 4) Aluminum Skid Seats (Trailer Adaptors) 36" Wide - Each comes with its own Locking Rod
    • (Qty 2) Double Ramp Hangers for 5" Thick Ramps
    Note: A pair of hangers required 1 Left piece and 1 right piece. A pair holds 2 Ramps.
    • (Qty 2) Hanger for Single Ramp Stand (2 Required per Set)
    Note: There is No Left or Right with these.
    • (Qty 2) Ramp to Load Leveler Converter Stake (Converts One Ramp)
    Note: Converter Stakes are built for standard Stake Pockets 3 3/8" WIDE
    • (Qty 3) Clips to Hold Lumber when using Ramp as Leveler (3 Clips per Ramp Required)


    Optional Accessories (Additional Cost):
    • (Qty 2) 18" Wedge fixed at ends of both ramps that touch the floor. Makes loading smoother. (2 Required per truck, regardless of kit type purchased)
    • (Qty 1) Dolly to move around Ramps (1 per Truck is enough)

    Learn More
    $4,348.79

  • Trailer Loading Ramp Set - Single 8' x 18"

    A Complete Trailer Loading Ramp Double Set Includes:

    • (Qty 2) 8' x 18" 23,500 Lbs Single Ramps
    • (Qty 2) Aluminum Skid Seats (Trailer Adaptors) 36" Wide - Each comes with its own Locking Rod
    • (Qty 2) 18" Wedge fixed at ends of both ramps that touch the floor. Makes loading smoother. (2 Required per truck, regardless of kit type purchased)
    • (Qty 1) Dolly to move around Ramps (1 per Truck is enough)

    Learn More
    $1,564.93

    Out of stock

  • Trailer Loading Ramp Set - Double 16' x 18"

    A Complete Trailer Loading Ramp Double Set Includes:

    • (Qty 4) 18" x 96" 23,500 Lbs Single Ramps
    • (Qty 4) Aluminum Skid Seats (Trailer Adaptors) 36" Wide - Each comes with its own Locking Rod
    • (Qty 2) Adjustable Stands 18" - 24"
    • (Qty 2) 18" Wedge fixed at ends of both ramps that touch the floor. Makes loading smoother. (2 Required per truck, regardless of kit type purchased)
    • (Qty 1) Dolly to move around Ramps (1 per Truck is enough)

     

    Learn More
    $3,564.87

    Out of stock

  • Auto Loading Ramp (Pair of 2)

    • Dimensions: 4'/6' x 12" - 7'10" x 15"
    • Weight Capacity: 2,500 Lbs - 5,000 Lbs per axle weight capacity
    • Weight of Each Ramp: 17 Lbs - 36 Lbs (34 lbs - 72 lbs for pair)
    • Pair of 2 (1 Set)
    Learn More
    $236.28

  • Equipment Loading Ramp (Pair of 2)

    • Dimensions: 7'6" x 14" x 4.25" & 14' x 16" x 6.25"
    • Weight Capacity: 10,000 Lbs - 12,000 Lbs per axle weight capacity
    • Weight of Each Ramp: 47 Lbs - 115 Lbs (94 lbs - 230 lbs for pair)
    • Pair of 2 (1 Set)
    Learn More
    $626.08

  • 20,000 Lbs Load Leveler 20" High For Standard Stake Pocket 3 3/8" Wide

    • 20,000 lb maximum load capacity per bridge (over 48″ span)
    • Lightweight military grade aluminum construction (less than 70 lbs each)
    • 20″ height in stock
    • Sets up in minutes without any tools
    • Fits all 102” wide trailers- includes adjustable stake pocket inserts
    • Heavy duty chain casting accepts 3/8” chain to secure the levelers to the trailer
    • Made in the USA
    • 5 year unconditional warranty – The Best in the Industry
    •Three Lumber clips per Load Leveler Recommended but not included (Please add to your order separately if you don't already have lumber clips

    Warranty Policy:

    Learn More
    $499.99

  • Ramp to Load Leveler Converter Stakes (1 Pair)

    • Pair consists of two converter stakes, One Left Side and One Right Side (Marked From Driver's perspective)
    • This pair will convert one single Ramp into a single Load Leveler
    • Built for standard stake pockets 3 3/8" Wide
    • Use chain binder with up to 3/8 chain to securely fasten stakes to trailers stake pockets
    • Three Lumber Clips ought to be used with each Load Leveler or Ramp converted to Load Leveler (Recommended but not included. Lumber clips must be added separately to order)

    Warranty Policy:

    Learn More
    $179.98

  • Clips to Hold Lumber when using Ramp as Leveler

    • 3 Clips per Ramp Required
    • May also be known as Dunnage holders
    • Three required for each ramp used as a load leveler
    • Comes in both 6″ wide, for 20K max per axle ramps, 5″ wide for all other ramps
    • Required for use atop spacers to protect the aluminum ramp and spread the load
    • Converter Stakes are built for standard Stake Pockets 3 3/8" WIDE
    • There is a connector piece at the bottom of the Converter stake. It comes in storage mode. To be deployed, it needs to be removed, flipped, re-inserted and locked. Then the converter stake is locked in place inside the trailers stake pocket. To store, repeat the operation in opposite.
    • Each Converter Stake is marked "L" or "R" For Left or Right, designated from the perspective of the person sitting on the driver's seat or, put another way, a viewer standing at the rear of the trailer looking toward the Cab side.
    • The Converter stakes must be used in pairs of Left and Right.
    • The very top of the Converter stake has a single cast piece with a slit. This is to guide the G70 chain through it.
    • When the ramp is flipped and inserted down the channels of the converter stake, the wheel surface of the ramp should be facing toward the trailer rear
    • Three "H" shaped Lumber Clips per pair of Converter Stakes are necessary to lock the lumber in place
    • The Lumber itself is not included

    Warranty Policy:

    Learn More
    $7.99

  • Double Ramp Hanger Set (Stores 2 Ramps)

    • Stores ramps beneath the trailer
    • Pair consisting of Mirror Image Complimentary Hangers for 5" Thick Ramps
    • This pair, when put together, enables storage of two ramps
    • To Store 4 Ramps, 2 such sets are required

    Warranty Policy & Manual Instructions:

    Learn More
    $249.98

  • 18" Wedge - Makes Loading Smoother

    • 18" Wedge fixed at ends of both ramps that touch the floor
    • Makes loading smoother
    • (2 Required per truck, regardless of kit-type)
    • Stabilizes ramp systems on soft ground
    • 23,500 Working Load Limit

    Warranty Policy:

    Learn More
    $59.99

    Out of stock

Grid  List 

Items 1 to 10 of 15 total

Page:
  1. 1
  2. 2
per page

Our Heavy Duty Aluminum Trailer Loading Ramps and Step Deck Ramps are available in an array of design styles to provide easy transition between trailer platforms for cargo vehicles. An all-aluminum construction by AWS-certified welding technicians together with adjustable pivot points yields light-weight components that are relatively easy to handle. Most items can be conveniently stored along the trailer's main beams, or stored in one of our toolboxes.


Trailer Loading Ramps?

Trailer loading ramps are mainly used by drivers with step trailers rather than flatbed drivers. Step trailers are long trailer beds with two platforms of different heights. The shorter part of the trailer gives drivers a foot or two of additional height space, so they can safely haul tall loads under bridges.

Trailer loading ramps empower drivers to easily transition cargo between the high and low platforms on their step-trailer. Portable ramps can also be used to load heavy cargo from the ground, or they can be converted into load levelers by turning them on their side and securing them to the lower platform. That essentially transforms a step-trailer bed into a flatbed with a single, consistent height, so the step-trailer can load lumber or steel.

Components of Trailer Loading Ramps?

Trailer ramps have five relevant components.

The Ramp’s Surface:

This is available in two options. The first is evenly spaced military-grade aluminum rungs so heavy-duty equipment tires can easily grip and roll up the slope, and other cargo just slides up and down the ramp.

The second ramp surface option is a slip-resistant surface made of flat aluminum textured with EZ Traction plating, which is optimal for auto-hauling.

Adjustable Stands:

Which let you change the ramp's height (and, in doing that, the steepness of the ramp's incline) to safely transition cargo from trailers of various heights.

Ramp Hangers:

Ramp hangers or storage brackets make it easy to store ramps under your truck, or on the back of your trailer, while you're driving.

Skid Seats:

Attaching brackets are securement points that are welded to the trailer, so you can attach the ramp to it safely. Other connection-point options include hook ends, flat plates, pin-ons, and hook/plate hybrids.

A Trailer Ramp Dolly:

A trailer dolly ramps have wheels and lets you easily cart your ramp across a lot or warehouse.

When you’re converting a trailer loading ramp into a load leveler, you’ll need two extra accessories

Ramp to Load Leveler Converter Stakes:

These stakes are compatible with the typical stake pockets on the sides of a trailer and need to be fastened to the pockets with a chain binder.

Lumber Clips:

If you’ll be hauling lumber, you need these to secure the lumber to your load leveler.

How are Trailer Ramps Beneficial for Loading Equipment?

Heavy-duty trailer ramps are safer than using cranes to load heavy cargo. Because they’re relatively lightweight, you’re unlikely to sustain an injury from physical strain, and they don’t add much to your truck’s total weight when they’re stored.

For wheeled equipment like forklifts, you can even drive the equipment right up the ramp and into place.

When to Use Aluminum Loading Ramps?

Step-trailer drivers use these truck ramps most often to load tall, heavy cargo like cars, Bobcat vehicles, machinery, military equipment, or any kind of heavy, non-stackable cargo.

How to use Truck Ramps?

The key to using trailer loading ramps successfully knows the specifics of your cargo. Different ramps have different weight capacities, often noted per axle, and many are designed with specific loads in mind.

For example, extremely heavy-duty ramps can be geared towards heavy military equipment, while ramps optimized for forklifts are typically shorter.

Qualities of Mytee’s Trailer Loading Ramps?

Since no two hauls are the same, we give you the power to customize your ramp's size, surface, connecting-point, and safety options. Choose from a wide variety of ramps right here online, or call us for a customization consultation at 1-888-705-8277.


  Loading...