COVID-19 UPDATE

(0 item) - $0.00

You have no items in your shopping cart.

section

Landing Gear and Trailer Stabilizer Stands

Your trailer is an essential part of your livelihood as an independent flatbed contractor. Even if you are employed by a flatbed company, the trailer you have been assigned is your lifeblood for getting loads. Make sure that the attached semi trailer landing gear is up to standards. If you need to replace the landing gear, we have exactly what you need at Mytee Products. Our semi trailer landing gear is designed to fit most trailers; it meets or exceeds all TTMA and AAR standards.

Mytee Products also carries heavy-duty trailer stabilizing stands and king pin locks as well. You should carry at least one set of stabilizing stands if you tend to carry larger and heavier loads that require complex loading and unloading. Stabilizing stands could mean the difference between safely operating your trailer and constantly having to worry about it. We offer both economy and heavy-duty options.


Grid  List 

Items 1 to 10 of 11 total

Page:
  1. 1
  2. 2
per page
  • Landing Gear Set 62,000# Lift 2 Speed External Gearbox

    Low Gear Ratio : 1mm/turn
    High Gear Ratio : 6.8mm/turn
    Extended Length : 1310mm
    Retracted Length : 830mm
    Static Load Capacity : 80T (160,000 Lbs)
    Lift Capacity : 28T (62,000 Lbs)
    Weight : 191 Lbs
    • 59 3/4 inch shaft
    • FUWA Type Gearbox
    • Single Side Installation
    • Includes master leg, cross shaft, crank, and slave leg

    Learn More

  • Heavy Duty Semi Trailer Stabilizing Stands

    • Static Load Capacity: 50,000 Lbs - 100,000 Lbs
    • Lift Capacity: 5,000 Lbs - 50,000 Lbs
    • Service Range: 39" - 51"

    Learn More

  • Sealed Air Brake Chamber

    Chamber: Dual
    Chamber Size: 30/30 or 24/24
    Stroke: Regular or Long
    Stroke Length: 64 mm or 75 mm

    Learn More
    $34.99

  • Relay Valve with Horizontal Delivery Ports R-12, Replaces Bendix 103009X

    • Relay Valve w/ Horizontal Delivery Ports R-12
    • Replaces Bendix Part # 103009X
    • Crack Pressure: 4 psi
    • Delivery Port Size: 1/2" pipe thread
    • Supply Port Size: 3/4" Pipe Thread
    • Relay valves are primarily used on long wheelbase vehicles to apply and release rear axle service or parking brakes.  They are air operated, graduating control valves of high capacity and fast response.  Upon signal from the service brake valve, they graduate, hold or release air pressure from the chambers to which they are connected.  They generally are mounted close to the chambers they serve.  
    Learn More
    $19.99

  • Slack Adjuster

    • Slack Adjuster
    • Size:10 Thread (Teeth) 3 Hole / 28 Thread (Teeth) 2 Hole
    • Slack Adjusters provide consistent brake adjustment minimizing problems with DOT roadside inspections. Slack adjusters maintain consistent shoe-to-drum clearance which will help maximize lining life.
    • This reduces the amount of time spent annually on brake relining.
    Learn More
    $14.99

  • Snugger 12v Diesel Air Heater with Timer Digital Controller

    • Efficient and effective tool for Idling reduction
    • Max Output: 7,850 btu / hr (or 2.3 kW)
    • Power Consumption at Max Output: 34 watt
    • Fuel Consumption at Max Output: 0.07 US gal / hour
    • Air Flow at Max Output: 49 Cfm (+/- 10%)
    • Timer and Digital Controller

    Learn More
    $699.00

  • Heavy Duty Chrome King Pin Lock w/ 2 Keys

    • Prohibiting 5th wheel from engaging king pin
    • 3 ¼-inch h x 3 ½-inch diameter lock
    • Slide bolt lock with 2 keys
    • Bright yellow warning tag on 12-inch chain
    • Covers entire king pin
    • Product does NOT come Keyed Alike.
    Learn More

  • Heavy Duty Chrome King Pin Lock 2.90" Diameter - Made in USA

    • Prohibiting 5th wheel from engaging king pin
    • 2.90" inside diameter and 3.5" length lock
    • Comes with 2 keys
    • Covers entire king pin
    • Product does NOT come Keyed Alike.
    Learn More
    $36.00

  • Weld On Kingpin for 5th Wheel 0.38" Made in USA

    • Made in USA
    • Made from 8630 Alloy Steel
    • Available in 4320H Steel
    • Approx 150,000 PSI Ultimate and 115 PSI Yield Strength
    • All king pins are 100% Brinell Hardness Checked, Magnetic particle inspected and Weldable.
    • These King Pins are also known as Mushroom King Pins.
    • These King Pins are not for off road equipment.  Galvanizing King Pins changes the temperament and dimensions of a king Pin.  Galvanizing voids the warranty.  
    • WARNING: The use of a lube plate alters the king pin dimensions from the SAE standards and may prevent proper coupling.
    Learn More
    $59.99

  • Heavy Duty King Pin Lock Kit - Made in USA

    Heavy Duty King Pin Lock Kit Includes:

    • 1 Qty -  A Style King Pin Made in USA
    • 1 Qty - King Pin Lock Made in USA
    Learn More

    As low as: $89.99

Grid  List 

Items 1 to 10 of 11 total

Page:
  1. 1
  2. 2
per page

Your trailer is an essential part of your livelihood as an independent flatbed contractor. Even if you are employed by a flatbed company, the trailer you have been assigned is your lifeblood for getting loads. Make sure that the attached semi trailer landing gear is up to standards. If you need to replace the landing gear, we have exactly what you need at Mytee Products. Our semi trailer landing gear is designed to fit most trailers; it meets or exceeds all TTMA and AAR standards.

Mytee Products also carries heavy-duty trailer stabilizing stands and king pin locks as well. You should carry at least one set of stabilizing stands if you tend to carry larger and heavier loads that require complex loading and unloading. Stabilizing stands could mean the difference between safely operating your trailer and constantly having to worry about it. We offer both economy and heavy-duty options.


What is the Meaning of Landing Gear?

Landing gear is a set of retractable “legs,” attached to the underside of a trailer on either side of the “fifth wheel.”

The fifth wheel is a horseshoe-shaped component on the back of a cab that locks onto the king pin, a vertical steel pin jutting from the bottom of the front of the semi-trailer. When locked, the fifth wheel keeps the tractor and trailer connected.

The landing gear on either side of the fifth wheel empowers a driver to unhitch the trailer from the tractor safely, stabilize a trailer on uneven ground, and lift a fully-loaded drop-frame trailer so the trailer lines up with the dock.

Landing gear can be automatic or manual. They legs are connected to each other with a connecting shaft, and they stand parallel to each other.

Landing gear has a crank and a gearbox that controls the legs’ height and the force the legs exert against the ground to raise or stabilize the trailer.

Landing Gear and Trailer Stabilizer Stands

Trailers come with trailer landing gear installed, but sometimes it needs to be replaced if it breaks or becomes damaged.

If you need replacement landing gear for your semi-trailer, we have what you need. Not sure if landing gear is what you’re looking for? Read on.

Qualities of Landing Gear?

  • Landing gear legs are often made of stainless steel or other corrosion-resistant metals.
  • Landing gear is standardized by the Truck and Trailer Manufacturer’s Association (TTMA) and the American Association of Railroads (AAR).
  • High-quality landing gear meets these standards, including those regarding working load limit and friction reduction.

How is Landing Gear Used?

  • Landing gear is used when hitching or unhitching a semi-trailer to a tractor to alleviate the tension that holds them together.
  • It’s also used to raise a full drop-frame trailer so it’s even with the dock and can be unloaded, and so the trailer can support the weight of a forklift being driven into it to unload cargo.
  • A trailer on uneven ground may also use landing gear to keep the trailer even and stable.
  • LTI Trucking Services created a cohesive guide for their drivers to successfully use landing gear safely.

What are the Accessory Options With Landing Gear?

We offer the following optional accessories with landing gear replacement:

Heavy-duty Semi-trailer Stabilizing Stands:

This heavy duty semi-trailer stabilizing stand gives you even more support for your trailer if it has to bear a lot of weight.

Snugger 12 volt Diesel Air Heater with Timer and Digital Controller:

The controller aspect of this device lets you preheat your cabin.

Heavy-Duty Chrome King Pin Lock:

This lock prevents thieves from hitching your unsupervised trailer to their tractor and driving off with it.

Sealed Air-Brake Chamber:

Sealed Air-Brake Chamber protects your brakes.

Wheel Chock with Eye Bolt:

Wheel chock along with the eye bolt improves traction by increasing the friction between the tire and the pavement.

Benefits of Landing Gear and Trailer Stabilizing Stands?

Landing gear is necessary for:

  • Hitching or unhitching a trailer from a tractor.
  • Reducing the risk that a trailer might tip, slip, or collapse during unhitching and unloading
  • Hauling tall loads. Drop-frame trailers are low to the ground, so a tall load can still pass under bridges. However, in order to unload the cargo at a dock, a driver must utilize landing gear to raise the drop-trailer to be dock-height.

Why to buy Landing Gear from Mytee Products?

  • Mytee Products never wastes money on a middleman, so we can pass our savings on to you!
  • Our landing gear and accessories are all high quality while staying affordably priced.
  • That’s how Mytee Products helps you haul safe and earn more.

  Loading...