What is the price range for ratchet straps?

Depending on the length, working load limit, and end hardware of the strap, the price can vary from prices as low as $10 to as high as $55 per ratchet strap.

What length ratchet tie-down strap do I need?

Ideally, it’s best to have more than the minimum required Truck straps for your load. The excess strap can be rolled up and gives you more room to work with when securing loads.

How often should you replace ratchet straps?

Depending on how much it’s used, straps should be replaced every 2 to 4 years. If there is any abrasion on the strap such as a tear or warping metal, it’s best to replace it as soon as possible.

What should I look for when choosing a ratchet strap?

Consider your load. How much does it weigh and what are you using to transport it? Each strap has a different working load limit as well as end hardware that fits specific tie-down points.

How To Use Ratchet Tie Down Straps?

1. Enable the release catch to open your ratchets 2. Close the ratchet and flip it over 3. Next, pull the strap through the open slot 4. Install and secure your end-fittings 5. Pull the loose end of the strap 6. Start ratcheting your strap and tighten it 7. Close it back down, then lock the ratchet handle in place 8. Pull and hold on to the release handle 9. Eliminate any excess webbing and tuck it under the strap. 10. When you’re done, fold it up and store it away

What is the price range for ratchet tie downs?

Depending on the length, working load limit, and end hardware of the strap, the price can vary from prices as low as $10 to as high as $55 per ratchet strap.

How often should you replace ratchet truck straps?

Depending on how much it’s used, straps should be replaced every 2 to 4 years. If there is any abrasion on the strap such as a tear or warping metal, it’s best to replace it as soon as possible.

What should I look for when choosing a Ratchet cargo strap?

Consider your load. How much does it weigh and what are you using to transport it? Each strap has a different working load limit as well as end hardware that fits specific tie-down points.

Kinedyne 2" x 27' Ratchet Strap with Flat Hook

SKU

RS227K

2" x 27' Ratchet Strap (Branded) with Wide Handle and Webbing
Width: 2 Inches
Length: 27 Feet
Weight: 5.8 Lbs
End Hardware: Flat Hook
Working Load Limit: 3,335 lbs
Breaking Strength: 10000 lbs
Fixed End Length: 18 Inches

Availability: In stock

$13.99

$13.79

for 10 and save 2%
$13.49

for 50 and save 4%

Skip to the end of the images gallery

Skip to the beginning of the images gallery

2" x 27' Ratchet Strap with WLL 3,335 lbs And Flat Hook-Kinedyne-Mytee Products

2" x 27' Ratchet Strap with Flat Hook Top view - Mytee Products

2" x 27' Ratchet Yellow tie down Strap with WLL 3,335 lbs And Flat Hook-Kinedyne-Mytee Products

2" x 27' Ratchet Yellow tie down Strap with WLL 3,335 lbs And Flat Hook- specifications label -Mytee Products

Shop for Other Sizes and Similar Products Here (Go)

13.99 USD

Product Description

Have A Question 0 Question | 0 Answer

Specifications

Specifications
Weight (Lbs)	5.80
Size	2" x 27' - Yellow
End Fitting	Flat Hook
Color	Yellow
Load Limit	3,335 lbs
Capacity	10,000 lbs
Material	Polyester
Bundle Size	1 - Pack
Strap Length	27 Feet
Strap Width	2 Inch

2" x 27' Ratchet Strap (Branded) with Wide Handle and Webbing
Width: 2 Inches
Length: 27 Feet
Weight: 5.8 Lbs
End Hardware: Flat Hook
Working Load Limit: 3,335 lbs
Breaking Strength: 10000 lbs
Fixed End Length: 18 Inches
Webbing Material: Polyester
Our Ratchet straps are designed to handle most types of flatbed tie-down requirements. All ratchet straps are tagged with their working load limit to meet DOT regulations and WSTDA recommended standards.

FAQs