We at Mytee Products believe that winch winders are simple but ingenious tools. Winch winders certainly qualify as those little things that make truck drivers jobs easier. It could also be coincidence that they are a popular product with our experienced truck drivers.
A winch winder is essentially a tool you attach to your winches in order to wind up straps post-delivery. It makes strap winding so easy that you can get a strap wound up and secured in under a minute. If you are not using a winch winder, then what? What are your other options?
A Winch Bar?
Let’s assume you use a standard winch bar to tighten down your straps when securing cargo. Winch bars are pretty common. You could, at least in theory, use that same bar to wind your straps back up again. But that would take forever and a day. Not only that, your arms would be pretty tired by the time you get finished. Even a ratcheting winch bar is not all that great for winding straps.
A winch bar is a good tool for tightening straps over the top of cargo. In fact, it’s nearly impossible to get straps tight enough without a winch bar. But it’s not the right tool for winding straps no longer in use. A winch bar is just too inefficient for this sort of thing.
Winding by Hand?
Your second option is to wind the straps by hand. You place your hand over the reel and rotate it while you guide the strap with the other hand. This gets old really fast. A lot of drivers will only do this for so long before grabbing a screwdriver and sticking it through the pinhole in the winch axle. The screwdriver solution certainly works, but it’s not a whole lot better than using a winch bar.
Detaching and Rolling?
There are some truck drivers who don’t like to leave their straps attached to winches when not in use. They prefer to detach the straps, roll them up, and store them in their toolboxes. This is obviously an option if you don’t want to leave your straps exposed to the weather and driving conditions. But once again, it is terribly inefficient.
Detaching straps and rolling them manually takes time you just don’t have. Furthermore, there’s no need to worry about the straps being exposed to weather and the elements. They will do just fine. You are still better off keeping your straps attached to your winches and winding them up when not in use.
Ratchet Straps Instead?
Lastly, there are some truck drivers who do not use winches on their trailers at all. Instead, they use ratchet straps run through the rails. Yes, it works. No, it is not the best option. This sort of arrangement requires a lot more manual labor than you really want to expend on cargo control. It’s a good option only if your flatbed work is limited and you’re not using a trailer for which you have permission to install winches.
At the end of the day the winch is still the most efficient way to use webbing straps as a way to control cargo. And as long as you’re using winches, you might as well wind your straps and store them in place. A winch winder makes winding a snap. Just attach the handle, crank it for a minute, and you’re all done. You can wind all of your straps in less time than it takes to get a cup of coffee.
Comments are closed