Electric 4-Spring 24' Dump Truck Tarp System - Complete Kit with Hardware

Mytee Products Electric Dump Truck Tarp System Kit provides the complete solution to dump truck operators. The electrically operated tarping system provides a quick and automated covering and uncovering of the load, enhancing safety, protecting the transported materials, and complying with necessary regulations. Our electric dump tarp kit adds convenience in transiting loose materials such as sand, gravel, or construction debris. Learn what more we offer in our complete kit.

• Electric Motor for Automated System: We provide a 12V 50：1 600W electric motor in our dump truck tarp system that ensures automated deployment and retraction of the tarp (front-to-back flip tarp system). A complete set of switch kits that handles the winding and unwinding of the tarp system.
• Additional Items for Dump Truck Electric Tarp Kit: You get a 50 ft 6 gauge dual wire to provide a substantial and secure amount of current flow. You’ll get axle mounting brackets to mount the motor on the side of the truck bed and rubber mounting bracket bumpers to prevent the edges from external contact.
• Telescopic Tarp Axle for Efficient Functionality: To ensure the smooth functioning of the dump truck tarp system, you’ll get a telescopic 103" Tarp Axle, 5" x 3/4" stud shaft, and 3/4" axle bearing with a flange that goes on the front of your tarping system. All three products ensure that the tarp spins freely, is rolled up, and is protected when not in use.
• Aluminum Telescopic Cross Tubes & Arms: Mytee Products’ electric dump truck tarp system includes a 103" aluminum cross tube that fits through the pocket on the end of your tarp. Use it to pull the tarp out over your loads. 
• Telescopic Arms for Driver & Passenger Side: Get telescopic upper and lower arms of 98-inch and 78-inch along with spiral torsion springs (fitted on the side of trucks) to support the structure in smooth deployment and retraction. The arms work both on the driver and passenger side. The upper arm comes assembled with 90-degree corners.
• Lightweight and Polished Material: We have specifically used aluminum material in our complete dump truck electric tarp kit for its lightweight quality and polished look. It ensures rust protection and durability while preventing pitting. You can also customize (easy to cut) the length of the arms, cross tube, and tarp axle as per your requirements.
• Secure Fastening: Our complete dump truck tarp system includes stainless steel bushings, aluminum pivot pins 4-sping pivot pins 4-spring, and an external retaining ring for secure fastening of the lower arm. Stainless steel bushing is typically used in conjunction with an external retaining ring. 
• Plastic Tarp Centering Flange Prevents Sudden Jerk: The plastic centering flange protects the cross tube upper arm from wear and tear whenever in use. The holes ensure a secure fastening whereas plastic further protects from constant rubbing, scratches, and pitting corrosion.

Note: 

• You’ll find loose spare parts in the kit for installation.
• A tarp is not included, buy it separately.
• Wind Deflector is not included, buy it separately.