8ft V Shaped Extension Handle

No More Headaches and Hassle!

PROTECT YOUR TARPS AND STRAPS!

EASY PLACEMENT!

DURABLE AND PORTABLE!

• When you tarp and secure a lot of loads, you need your tarps and straps to last as long as possible.
• When tarps are damaged by cargo’s sharp edges or corners, those abrasions cut right into the tarps’ lifespans.
• Mytee Products' V shaped Board Edge Protectors are meant act as a barrier between your tarps or straps and any sharp edges or corners on your cargo! No longer worry about your straps or tarps being cut or torn during transportation!
• No need for climbing on the load or up onto a ladder for placement of the corner protectors or adjustment of strap position. It can all be done with feet firmly on the ground, thanks to our 8' handle extension!

• Placing corner and edge protectors can be a hassle, especially if you need to move a ladder all around to load, to climb onto different platforms to reach the right place. Fortunately, v shaped-board extension handles eliminate stress!
• The durable plastic grip on the v shaped board ensures that the corner and edge protectors don’t slip out of the tool’s grasp while you raise it, yet easily slide out from the grip once the protector is placed!

• The extension handle and edge corner protectors are made of durable, heavy-duty polyurethane plastic, designed with strength and dent resistance in mind.
• The v shaped board handle is incredibly lightweight, clocking in at only 5 lbs! This makes it easy to carry, store, and transfer from truck to truck.
• Material: V-Style Corner Protectors are made from high density polyethylene
• Color: Blue is our main stock color. Depending on availability, we may switch color as needed to fulfill customer order.

Attach V Shaped Board to Handle

Extend To Proper Height!

Slide Handle Down!

Ready to Go!

• Take the Corner Protector and slide it into the rubber grip end of the handle.
• The edge protector should form a right angle with the flat part of the rubber grip.

• Raise the handle until the edge protector is level with top of a sharp-edged piece of cargo.
• Aim the edge protector so the horizontal side sits on the top of the cargo.
• The bent corner of the edge protector should cover the sharp edge of the cargo.

• Slide the handle downward vertically.
• The horizontal side of the edge protector, resting on the top of the cargo, should remain in place.
• Pulling the handle down vertically will let the edge projector slip out of the extension handle grasp.