Recently Viewed Products
(8 Pack) Trailer Stake Pocket D-Ring Zinc Coated Flatbed Utility
SKU
SPDR-Zx8
- 5/8" Forged D-Ring
- Fits 3.75" ID Stake Pockets (Standard 2 x 4 Stake Pockets)
- Working load limit is 5,400 lbs
- Capacity: 16,200 lbs
Availability: In stock
As low as $109.99
109.99
USD
Specifications
Load Limit | 5,400 lbs |
---|---|
Color | Silver |
Capacity | 16,200 lbs |
Pack size: 8 Pack
- STRONG: Our stake pocket D-Rings are forged steel with a zinc coated finish. Each stake pocket D-ring has a working load limit of 5400 lbs. Capacity is 16,200 lbs. Do not exceed Working Load Limit.
- PRECISE PLACEMENT: Provides a D-ring exactly where you need it on your trailer. Each stake pocket D-Ring comes with a ½” hitch pin w/ locking cotter pin and 4 pin holes, so you can adjust the height of your Stake pocket D-ring to fit your current load.
- FITS MOST STAKE POCKETS: Not all stake pockets are identical. Designed to be compatible with standard 2” x 4” stake pockets. This includes common flush and outside stake pockets. Please be sure to measure before you purchase.
DIMENSIONS:
- 5.5” Tall from the bottom of mounting plate to the bottom of the anchor.
- 3-3/8” Wide.
- 5” from bottom of the mounting plate to the top of the 4th pin hole.
- 4.25” from bottom of the mounting plate to the top of the 3rd pin hole.
- 3.5” from the bottom of the mounting plate to the top of the 2nd pin hole.
- 2.75” from the bottom of the mounting plate to the top of the 1st pin hole.
- Bent pin is 6-3/4" long and the clip is 3" long that goes inside it.
- RESILIENT: Our stake pocket D-Rings are zinc coated to resist scratches, dings, and rust.
- VERSATILE: D-Rings can be utilized as anchor points for a wide variety of hooks and end-fittings. D-Rings can be used to anchor grab hooks, j-hooks, S-hooks, shackles, and even tow hooks fit onto the ends of ratchet straps, winch straps, or chain binders.
- EASY-TO-USE: Slide the Stake Pocket D-Ring right into the stake pocket and use the ½” hitch pin to insert into the hole for your desired height and lock it into place using the cotter pin.
|
Stake Pocket D-Ring Zinc Coated Dimensions:
|
|
|
||
STRONG | PRECISE PLACEMENT | VERSATILE | EASY-TO-USE |
Our stake pocket D-Rings are forged steel with a Zinc coated finish. Each stake pocket D-ring has a working load limit of 5400 lbs. Capacity is 16,200 lbs. Do not exceed Working Load Limit. | Provides a D-ring exactly where you need it on your trailer. Each stake pocket D-Ring comes with a ½” hitch pin w/ locking cotter pin and 4 pin holes, so you can adjust the height of your Stake pocket D-ring to fit your current load. | D-Rings can be utilized as anchor points for a wide variety of hooks and end-fittings. D-Rings can be used to anchor grab hooks, j-hooks, S-hooks, shackles, and even tow hooks fit onto the ends of ratchet straps, winch straps, or chain binders. | Slide the Stake Pocket D-Ring right into the stake pocket and use the ½” hitch pin to insert into the hole for your desired height and lock it into place using the cotter pin. |
-
FITS MOST STAKE POCKETS: Not all stake pockets are identical. Designed to be compatible with standard 2” x 4” stake pockets. This includes common flush and outside stake pockets. Please be sure to measure before you purchase.
-
RESILIENT: Our stake pocket D-Rings are black powder coated to resist scratches, dings, and rust.
Zinc Coated Stake Pocket D-Ring | Black Stake Pocket D-Ring | |
Working Load Limit
|
5,400 Lbs | 5,400 Lbs |
Capacity
|
16,200 Lbs | 16,200 Lbs |
Color
|
Zinc Coated | Black Powder Coated |
Hitch Pin w/ Locking Cotter Pin
|
✔ | ✔ |
Hitch Pin Holes
|
4 | 4 |