What Does a Good Trailer Loading Ramp Kit Look Like?

Trailer loading ramps are yet another tool that flatbed truck drivers use to get cargo in place. But loading ramps for tractor-trailers are far different from the DIY ramps you might use on a small home utility trailer. They are much larger, much longer, and a lot stronger.

Mytee Products sells trailer loading ramps along with all the accessories truck drivers need to utilize them. If you are new to flatbed trucking, you might need an entire kit to start from scratch. Please note that our kits come with absolutely everything you need for loading ramp deployment. Other kits may not be as extensive as ours.

So what does a good trailer loading ramp kit look like? It contains the following:

Single Ramps

Obviously, every loading ramp kit will come with at least two single ramps; one for the left side and one for the right. Our kits come with two sets of 18″ x 96″ ramps with a capacity of 23,500 pounds. These ramps are sturdy enough to be used as load levelers for timber loads as well.

Adjustable Stands

Ramp stands provide the support underneath while loads are driven up the ramps. They are also sold in pairs; one for the left side and another for the right. Our ramp stands are adjustable from 18 to 24 inches to account for different trailer heights.

Aluminum Skid Seats

Skid seats are mounted on the back of a trailer to provide an anchor for locking ramps in place. Once locked, ramps cannot pull away from the trailer. They are also sold in pairs; one pair for the bottom deck and another for the upper deck.

Ramp Hangers

Ramp hangers make it possible to carry trailer loading ramps from one job to the next without taking up valuable space on the flatbed. They are mounted to the main trailer frame using heavy-duty bolts. The ramp hangers in our kit are double hangers, meaning there are slots for two ramps. Two sets of hangers would allow for carrying a total of four ramps; two on each side.

Ramps Stand Hangers

If you are going to carry loading ramps on the trailer, you’re going to have to carry ramp stands as well. A good trailer loading ramp kit includes one hanger for each stand. Again, these hangers are mounted on the main truck frame, either in front of or behind the ramp hangers.

Ramp Wedges

Finally, ramp wedges are fixed to the lower ends of ramps to provide a smooth transition between the ground and the ramp. This allows for smoother loading while also reducing the risk of ramp movement during loading. Most loading ramps require the use of a wedge.

Mytee Products offers flatbed truck drivers a trailer loading ramp master kit that contains all the above components along with a few extras. For example, we also include a lightweight dolly that makes moving ramps around nearly effortless. Using a dolly is a lot less strenuous than trying to carry unwieldy ramps without assistance.

Please feel free to check out our ramp kit at your earliest convenience. Our website details everything that comes in the ramp kit for your convenience. If you do not need the entire kit, we do sell individual pieces as well. Rest assured that all our loading ramps and accessories are made right here in the USA to the highest possible standards.

If you’re unsure about anything included in our ramp kit, please don’t hesitate to ask. We want you to be fully informed and completely comfortable with your purchase before you buy.

If you enjoyed this post, please consider leaving a comment or subscribing to the RSS feed to have future articles delivered to your feed reader.

Comments are closed