More from: palletizing

Ratchet Straps and Palletizing Strategies

On a beautiful spring day in central Florida, a flatbed truck was seen traveling down the road with a load of pallets packed with decorative paver stones. The pallets had been completely wrapped with shrink wrap before being loaded onto the trailer. To keep them secure, the driver ran two ratchet straps over each pallet row with large, plastic edge protectors between the straps and the cargo. This was the perfect setup for this kind of load.

Key to the driver’s strategy was securing the pallets from movement without damaging the paving stones. Now, it might seem a bit of overkill to use the edge protectors in light of the fact that the pallets were wrapped in shrink wrap, but shrink wrap does not cover the tops of pallet loads – just the sides. The highest layer of paver stones was fully exposed on the top surface. Edge protectors were necessary to protect the stones and ratchet straps alike.

Every Situation Is Different

The scenario described here is a perfect illustration of how wide the variation can be in palletized loads. For example, just because the shipper in this case used shrink wrap on the pallets doesn’t mean every shipper will do likewise. Paver stones are heavy enough that they will stay in place pretty much on their own, so some shippers will use a couple of aluminum straps along with large pieces of cardboard rather than shrink wrap.

How cargo is palletized really depends on the cargo itself and what the shipper believes is necessary to provide adequate protection. It is still the driver’s responsibility to get cargo to its intended destination without damage, regardless of how it is palletized. Therefore, it is not wise for drivers to rely on shippers and their palletizing strategies. Every situation is different.

In this case, all the driver needed to do to properly secure and protect the pallets was to have them stacked in rows before securing them with ratchet straps and corner protectors. If the palletizing method had been different, the driver might have had to choose another means of securing them.

This solution was relatively simple because all the pallets were of uniform size and height. Indeed, securing this load was probably one of the easiest things the driver ever had to do. There were no tarps involved, the weight of the pallets prevented them from being stacked, and the cargo itself was heavy enough that it was not prone to excessive movement.

The Right Kind of Equipment

As cargo and palletizing strategies are different, a flatbed driver has to keep a good supply of all the right equipment on board. In this case, it means ratchet straps and edge protectors. In other cases, drivers will need bungee straps, tarps of various sizes and materials, and even wood blocks to prevent cargo from moving. The inventory of necessary equipment can be rather extensive for truckers who are willing to haul just about anything.

Here at Mytee Products, we do our best to maintain a solid inventory of all the equipment and supplies to flatbed truck needs. We also strive to ensure that all the products in our inventory come from trusted brand names truckers know and recognize. This helps us to ensure quality with every product sold.

We have no way of knowing where the trucker in the scenario described here purchased his ratchet straps. But we can say that if they were purchased from Mytee Products, they were made with high-quality bedding material built to last. They were the perfect tool for securing that kind of load.