More from: lever binders

Recoilless Lever Binder – What You Need to Know

There are two kinds of binders used by flatbed truckers in America: the lever binder and the ratchet binder. The latter option is increasingly becoming the preferred kind of binder because it is generally considered safer and easier to use. Yet there are times when the lever binder is the better tool for the job.

Mytee Products carries several different binder models that our customers can choose from. If you are new to the trucking industry, we certainly want you to be safe and It is for this reason that we decided to put together a blog post providing all the basic information you need to know about one of our more popular products: the recoilless lever binder from Durabilt.

recoiless lever binder

How Binders Work

Lever binders, in general, use the principle of leverage to tighten chains attached to cargo. For all practical purposes, both ends of the chain have to be fairly close together at the point of blinding in order to tighten them appropriately using the lever handle. Think of it in terms of an oil filter wrench or vice grips, if that helps.

By contrast, a ratchet binder uses the same principle as a pulley system. By combining the power of the lever with the energy distribution properties of a ratcheting system, the user can apply less force to the mechanism while still tightening chains to the same degree. There is also considerably less danger with a ratchet binder because resistance is distributed across a larger area.

We say all that to say that the first thing you need to know about recoilless lever binders is that they store a considerable amount of potential energy once chains are tightened down. That potential energy can do an awful lot of damage if it is released too quickly. This is why you have to be extremely careful with these binders.

Tips for Safe Use

A recoilless lever binder is safer than a lever binder without a recoilless handle. Still, you have to be careful. Below is a list of tips for the safe use of our recoilless lever binder:

  • No Cheater Bars – Never use a cheater bar on any lever binder, especially to loosen the handle. That potential energy we talked about could cause the system to come apart quickly and violently enough to injure you.
  • Stand Clear – Whenever tightening or loosening a recoilless lever binder, make sure everyone else is standing clear in case something goes wrong. Neither you nor anyone else should be standing on the load either.
  • One Man Job – You should be able to secure your load properly using a recoilless lever binder alone. If it takes two or more of you to tighten down chains, you need to rethink what you are doing.
  • Wear Protective Gear – It is a very good idea to wear gloves and safety glasses while tightening and loosening loads. Better safe than sorry should something give way.
  • Conduct Regular Inspections – Be sure to check every recoilless lever binder in your inventory before and after each use. Regular inspections make it easier for you to spot problems before something unfortunate happens.

There are times when the recoilless lever binder is the only tool appropriate for the job. Should you decide to use these binders, just be careful and let common sense prevail. You should have no problems as long as you do so.

Save