More from: E-Track straps

Horizontal or Vertical: How Do You like Your E-Track Straps?

When you walk into a store that sells cargo control supplies and ask for e-track straps, and you’ll have to choose between horizontal and vertical. Yes, there are two kinds of e-track for different types of cargo control strategies. Both work the same way. The only difference is how the anchor points are presented in relation to the length of the track. The difference though, is important to certain types of loads.



Horizontal E-Track

The more commonly used of the two e-track options is horizontal. The track gets its name from the fact that it is designed to be mounted horizontally along the inside of a dry goods or a box truck, either on the walls or along the floor. As for the anchor points, these are engineered to be perpendicular to the top and bottom edges of the track.

Box trucks are the ideal environment for horizontal e-track because they tend to haul all sorts of loads that don’t necessarily take up all of the dead space in the box. Horizontal tracks offer the maximum number of anchor points for an unlimited combination of cargo control strategies.

For example, a truck driver could use load bars that stretch across the entire width of the box to keep cargo from moving front to back or vice versa. Provided that a load is secure from side to side, load bars may be all that’s necessary to keep things in place. The main advantage of load bars is that they can be deployed and removed in just seconds. They have specially designed ends that slip quickly into anchor points and snap into place.

Loads requiring a bit more control can be secured with bungee cords, ropes, or mesh straps. Drivers can use the built-in anchor points or attach D-rings, hooks, or other anchor points as needed. And because horizontal tracks can be secured quickly and easily with screws, it doesn’t take much to outfit a trailer or box truck with the appropriate number of e-tracks in just minutes.

Vertical E-Track

Vertical e-tracks are names so as they designed to be installed vertically. The anchor points are engineered to be parallel to the inside and outside edges of the track, making it possible to adjust the height of load bars, straps, and bungee cords. A vertical system is preferred when the height of hauled loads changes from trip to trip.

Some flatbed truckers have found creative ways to use vertical e-track by attaching it right to the bed of the trailer. This provides anchor points that run parallel to the outside edges of the trailer, giving drivers plenty of options for tying down cargo. Having said that, e-track should not be relied on as the sole means of anchor points for flatbed loads. They should offer only supplemental anchor points for extra anchoring or to secure tarps over loads that have already been solidly anchored.

We Carry E-Track

When shopping for e-track, look for a galvanized product made of high-grade steel. Mytee Products carries both horizontal and vertical e-track in 12-gauge galvanized steel with anchor points every 2 inches. We sell them in 5-foot lengths for easy configuration.

As with any of your trucking supplies, quality means something. Paying a little extra for a high-quality product goes a long way toward saving money in the future by not having to replace your products as often. Please take a look at our e-track along with related items such as ratchet straps, cam straps, load bars, and cam buckles. We have everything you need to keep your cargo safe and secure.

Essential Tools for Cargo Securement

The average consumer has some knowledge on trucking and cargo transportation depending upon their personal relocating experiences. Some truck drivers who are relatively new to the trucking profession tend to be unfamiliar to the tricks of tarping and protecting the load they are about to transport. Yet proper cargo securement is a matter of having the right tools at hand for each job.

Whether someone is new to the profession or is a veteran trucker, at the end of the day, it boils down to remembering and applying the basic rules of cargo securement. It is about preventing a load from shifting in any way that could damage cargo or cause it to fall from the trailer so that it reaches it destination safely.

Here are some essential and helpful tools truckers could use to protect their truckload:

E-Track Straps

E-Track straps are primarily used for dry goods or refrigerated trailers. It is a slotted rail normally installed along both sides of a trailer’s interior at a height matching that of the cargo. The purpose of e-track is to keep the cargo in place and prevent is from sliding around.

This can be accomplished in one of two ways. The first is to use a shoring bar or decking beam made of aluminum and galvanized steel. Each end of the bar is fitted with a mechanism that fits into the e-track and locks into place. A shoring bar can handle pretty substantial loads. Where more flexibility is required, ratchet straps can be used in place of the rigid shoring bar. Straps are attached on both sides of the trailer and ratcheted together in the middle.


Winch Straps

Winch straps tend to be popular with flatbed truck drivers. They are made with heavy duty webbing material that meets or exceeds all DOT regulations and industry standards. They typically come with a flat hook, wire hook or chain anchor on one hand. Winch straps get that name because they are tightened down using a standard winch system. They provide maximum cargo securement strength in a package that is easy to deploy.

Corner and Edge Protectors

Truck drivers never simply back up to a trailer, hook it and go. They have to make sure their loads are secured properly prior to departure. Flatbed drivers have to place tarps over their cargo as well. Tarps are used to protect cargo from varying weather conditions, road situation and while they use the right corner and edge protectors to protect their tarps from wear and tear.

Corner and edge protectors are a great option as there are many choices available depending on the application. For example, a pyramid shaped tarp protector needs to be used if a load may cut or rip the tarp. These small pieces of plastic are placed over sharp corners and secured with webbing.

Another popular option is the v-shaped edge protector. This tool comes in a variety of sizes and can be made of plastic or metal. V-Shaped edge protectors are used to protect cargo, tarps, and straps.

Having the right tools for cargo securement makes the trucker’s job much easier. Mytee Products carries a wide range of essential load securement tools that range from straps to edge protectors to high-quality tarps needed in North America.