Key Features to Look for in Your RV Cover

In your quest for an RV or trailer cover, note this: the features you choose are important. An RV or trailer cover is not just a piece of canvas you throw over the top of your rig at the end of the season. It is a tool for protecting your RV or trailer whenever it’s not in use. The better the tool, the better job it will do.

You can purchase generic RV and trailer covers or covers custom-made for your particular make and model. Whether generic or custom, you should be looking for certain features. Those listed below are the ones we believe are most important.

1. Adequate UV Protection

We assume you are purchasing an RV or trailer cover because you will be storing your rig outside. As such, we recommend not settling for something that doesn’t offer adequate UV protection. Ultraviolet rays can damage seals around windows and doors. They can be harmful to your AC unit and fade the finish.

A good cover offers adequate UV protection, especially on the top panel. If you do not understand how UV protection is rated, do some online research before you buy. You will do better with a cover that has a higher UV rating.

2. Built-In Air Vents

One reason for using a cover is to keep out moisture that would otherwise promote mold and mildew growth. As such, look for a cover with built-in air vents. A cover with no vents will allow moisture to be trapped inside. And yes, you can end up with trapped moisture due solely to condensation. You need vents that promote air circulation and allow moisture to evaporate.

3. Zipper Access to Doors and Windows

From a practical standpoint, a good RV or trailer cover offers zippered access to at least the rig’s a side door. Access to windows – and motor compartments on RVs – doesn’t hurt either. Zippered access lets you get into the unit without having to remove the entire cover.

A lot of generic trailer and RV covers offer multiple access points on the sides. That way, you don’t necessarily have to measure exactly where doors and windows are. You have access all the way around the unit.

4. Reinforced Seams and Corners

An RV or trailer cover without reinforced seams and corners is one that is more likely to tear. Need we say more?

5. Adjustable Tension Panels and Elastic Corners

An RV cover is only as good as its fit. As such, look for one with two key features: adjustable tension panels on the front and rear and elastic corners.

The adjustable panels allow you to apply the appropriate tension at the front and rear of your rig in order to keep the cover securely in place. You do not want it flapping in the wind. As for the elastic corners, they tuck around the bottom of the rig the same way a fitted sheet tucks under the bottom of a mattress. Elastic corners keep everything in place.

We personally recommend RV and trailer covers made with ripstop polyester fabric. Others prefer canvas, but ripstop polyester is lighter and easier to deploy. It is also easier to keep clean.

Mytee Products is proud to carry multiple models of RV and trailer covers. Once you know the measurements of your rig, feel free to browse our inventory of covers suitable for your particular setup. If you have any questions or concerns, please feel free to contact us before you purchase. Our goal is to make sure you get the right cover for your RV or trailer.