How to Choose the Right Class of Beacon Lights for Flatbeds

Beacon lights are tools flatbed truck drivers can use to warn other drivers of potentially hazardous conditions. They are required for certain kinds of loads, such as oversize loads, for example, but drivers can use them to indicate any number of hazards. The type and number of beacon lights a driver chooses depends on the load being carried and the amount of danger it represents.

Manufacturers make beacon lights in three classes which are discussed below. Most modern products are made with LED bulbs to maximize both efficiency and illumination. If you are in need of beacon lights, Mytee Products carries an excellent selection for you to choose from.

 

beacon_lights

Class 1 – The Strongest and Brightest

Class 1 beacon lights are the strongest and brightest of all three classes. These are the lights typically found on police cars, ambulances, fire trucks, and so forth. Think of class 1 beacons as warning lights for the most hazardous situations. They are up to four times brighter than class 2 lights.

For flatbed truck drivers, class 1 beacons would be the ideal solution for extremely oversized or hazardous loads. At least one would be mounted on the tractor; two or more would be mounted on the trailer or the cargo itself. And, of course, any escort vehicles traveling with the tractor-trailer would be equipped with class 1 beacon lights as well.

Class 2 – Medium-Range Lighting

A typical class 2 beacon light is about twice as bright as a class 3 product. These lights are used for warning traffic at an intermediate range that potential hazards are present. They are the light most normally seen in road construction settings. They can be solid, rotating, or strobes.

Class 2 beacon lights in a trucking scenario would be used for hazardous loads that don’t necessarily qualify as being oversized. The driver wants to alert the public of the potential hazard, but other drivers do not necessarily have to be cognizant of the size of the load. Class 2 beacons are very helpful for timber loads, especially when driving in limited visibility.

Class 3 – Light Duty Beacons

Class 3 beacon lights are considered the light duty beacons for warning purposes. They are the least bright and normally not used by flatbed truckers for anything other than increasing visibility during inclement weather. More often than not, class 3 beacons are the domain of forklift trucks and small industrial vehicles. However, yard tractors may be fitted with them to increase safety in the freight yard.

Mounting Choices for Beacon Lights

Flatbed truckers who routinely haul oversize or hazardous loads will probably want to mount permanent beacon lights on their tractors. One or two on the roof and perhaps an additional light on the front bumper would be appropriate. Permanently mounted lights are not suitable for trailers due to load variations.

Here at Mytee Products, we carry beacon lights with magnetic mounting systems. These are designed to be temporary. They are ideal for the trucker who only hauls oversize and hazardous loads occasionally; they are also ideal for trailers because their location can be determined by the load.

If you haul hazardous or oversize loads, you should have at least a basic supply of beacon lights in your toolbox. We recommend a combination of strobes and steady-on lights to accommodate different needs. Note that some of our lights feature dozens of flash patterns that can be customized for purpose. And remember, beacon lights are about safety. Do not settle for inferior quality products that may not hold up.

Save